Applied Filters
Category:
- All Categories
- Wiring Connectors Splicing-Terminating Accessory Kits
Narrow Your Results
Category
- Motor Connector Supplies (63)
- Splice Seals and Accessories (49)
- Connector-Terminal Covers (27)
- Cable End Seals and Caps (20)
- Busbar Connection (17)
- Splice Ground Kits (13)
- Resins and Compounds (12)
- Connector-Terminal Seals and Insulators (9)
- Resin and Compound Applicators (2)
- Transformer Terminal Covers (2)
Manufacturer
- 3M (70)
- ABB INSTALLATION PRODUCTS (44)
- BELDEN (5)
- BURNDY (17)
- EATON (1)
- EATON BUSSMANN SERIES (1)
- NVENT CADDY (7)
- NVENT ERIFLEX (8)
- O-Z/GEDNEY (1)
- PANDUIT (1)
- RAYCHEM (4)
- SIEMENS (1)
- TE CONNECTIVITY (54)
Cable Type
- 1C (1)
- 1C Jacketed URD (7)
- 1C Non-Shielded (21)
- 1C Shielded (4)
- 1C Shielded and Non-Shielded (8)
- AWG Min 16, AWG Max 14 (1)
- CU (1)
- Jacketed Concentric Neutral (5)
- Jacketed Polymeric, Unshielded (1)
- Shielded (2)
- Tape Shield, Longitudinally Corrugated (1)
- Underground Feeder (1)
- Unjacketed and Jacketed URD Cable (1)
Installation
- 2 Piece (1)
- Direct Burial (1)
- Hex Head Slotted Set Screw, Parallel Groove (1)
- Hinged One-Piece (14)
- Locking-Latches (4)
- Snap Shut One Piece (1)
- Two-Piece (1)
Material
- Aluminum (1)
- Clear PVC (1)
- Cold Shrink (1)
- Cold Shrink Tube (3)
- Cold Shrink and Mastic Tape (4)
- Copper (1)
- Copper Alloy Body, Brass/Copper Alloy Pressure Plate (1)
- Cross-Linked Polyolefin (1)
- EDPM Rubber (1)
- EPDM Rubber (15)
- EPDM Rubber, Re-Useable (4)
- Elastomeric Rayvolve (2)
- Electrolytic Bronze (1)
- Epoxy (2)
- Epoxy Insulating/Encapsulating Resin (1)
- Gel Filled Cap (2)
- Gel Filled Cap, Cap Clamp (3)
- HDPE, Black (1)
- Heat Shrink (5)
- Heat Shrink Tube (7)
- Molded Rubber, Re-usable (16)
- Neoprene Body, Nylon Straps (6)
- Neoprene Rubber (3)
- PVC (1)
- Plastic (7)
- Plastic, Clear (1)
- Polycarbonate (2)
- Polyethylene (11)
- Polymeric (1)
- Polymeric, Polypropylene Clamp, Elastomer Cover (4)
- Polyolefin, Heat Shrink (11)
- Polypropylene (4)
- Polypropylene Cover (1)
- Polyurethane (1)
- Polyurethane Resin (4)
- PowerGel Sealing Materials (1)
- Re-enterable Polybutadiene (2)
- Resin Mold (Jacket not included) (1)
- Rubber (3)
- Stainless Steel Blade (1)
- Thermoplastic Elastomer (7)
- Thermoplastic Outer/Neoprene Inner (1)
- Thixotrophic Polyurethane Resin (1)
- Urethane Resin (1)