Applied Filters
Category:
- All Categories
- Tools and Installation
- Power Tool Accessories Drill Components and Accessories
Narrow Your Results
Manufacturer
- BLACK & DECKER (8)
- BOSCH (16)
- DREMEL (1)
- DRILLCO (44)
- JACOBS (42)
- L.S. STARRETT COMPANY (2)
- MAKITA USA (1)
- METABO (37)
- METABOWERKE GMBH & CO (5)
- MILWAUKEE (70)
- NVENT CADDY (2)
- OSBORN MANUFACTURING CO (4)
- RIDGID (4)
- ROTOZIP (1)
- WEILER BRUSH CO (1)
Function
- 1-1/4 in. Female to 5/8 in. Male Core Bit (1)
- 3/4 in. Weldon to 1/2 in. Chuck Adapter (1)
- Adapt Morse Taper Shank Tools to Larger Morse Taper Holders (1)
- Adapt Smaller Morse Taper Shank Tools to Larger Machine Spindles (9)
- Adapts 1/2 in Square Drive Drills to 7/16 in Hex Quick Change Bits (1)
- Adapts 1/2 in. Straight Shank To No.0 Jacobs Taper (1)
- Adapts 3/4 in. Capacity Chuck to No. 3 Internal Morse Taper Socket (1)
- Adapts Morse Taper Shank Tools to Larger Morse Taper Holders (10)
- Adapts Morse Taper Shank Tools to Larger or Smaller Morse Taper Holders (15)
- Adapts No.2 Morse Taper To No.2 Jacobs Taper (1)
- Adapts No.2 Morse Taper To No.3 Jacobs Taper (1)
- Adapts No.2 Morse Taper to No.33 Jacobs Taper (1)
- Adapts No.3 Morse Taper To No.4 Jacobs Taper (1)
- Adapts No.3 Morse Taper to No.2 Jacobs Taper (1)
- Adapts No.3 Morse Taper to No.3 Jacobs Taper (1)
- Adapts No.5 Morse Taper To No.4 Jacobs Taper (1)
- Adapts R8 Bridgeport Taper To No.2 Jacobs Taper (1)
- Adapts R8 Bridgeport Taper To No.3 Jacobs Taper (1)
- Adapts SDS Max For Thick Wall Core Bits (1)
- Adapts Spline to B Taper (1)
- Allows 1/4 in. Collets to Accept 1/8 in. Bits (1)
- Allows SDS-Max Hammers to SDS-Plus Bits (1)
- Core 6 in. Holes in Reinforced Concrete (1)
- Drilling Holes into nVent ERIFLEX Flexibar, PBC Braided Power Shunts and PPS Presswelded Power Shunts (1)
- Ejecting Taper Shank Tools (1)
- Eliminates Manual Squeezing by Keeping the Drill On (1)
- For Milwaukee Magnetic Drill Motor 4262-1 (1)
- For Milwaukee Magnetic Drill Motors 4292-1 or 4297-1 (1)
- Magnetized Bit End to Hold Screws (1)
- SDS Max Drill Bit to Spline Hammer (1)
- SDS-Plus to Chuck Rotary Hammer (1)
- Securely Attaches Chuck Key to the Cordset of Your Drill (3)
- Spline to SDS-Max (1)
- Spline to SDS-Plus (1)
- Spline to Taper Adapter (1)
- Tightens the Jaws of the 1/2 in. Capacity Chuck (1)
- Turns the MX FUEL™ Handheld Core Drill Into a Compact Coring Rig (1)
