Applied Filters
Category:
- All Categories
- Cable and Wire Management
- Conduit Conduit Fittings
Narrow Your Results
Category
- Conduit Connectors (1,166)
- Conduit Nipples (592)
- Conduit Couplings (584)
- Conduit Bushings (562)
- Conduit Straps (551)
- Conduit Reducers (418)
- Conduit Hubs (403)
- Conduit Locknuts (380)
- Conduit Plugs and Caps (260)
- Conduit Elbow Joints (222)
- Conduit Expansion-Deflection Joints (189)
- Conduit Combination Couplings (115)
- Conduit Spacers (98)
- Conduit End Adapters (50)
- Conduit Sealing Rings-Washers (50)
- Conduit Bulkhead Fittings (44)
- Conduit Sealing Bushing, Cable Terminating (33)
- Conduit Concrete Inserts (27)
- Conduit Drains (19)
- Pull Box End Fittings (16)
- Conduit Flange Plates (12)
- Conduit Running Pipe Thread (9)
- Conduit Concrete Sleeves (8)
- Conduit Unions (7)
- Pull Box Sleeves (4)
Manufacturer
- ABB (9)
- ABB INSTALLATION PRODUCTS (1,695)
- ANAMET ELECTRICAL (2)
- APPLETON (176)
- ARLINGTON INDUSTRIES (383)
- CABLE MANAGEMENT PRODUCTS (11)
- CABLELAN PRODUCTS (2)
- CALPIPE INDUSTRIES (124)
- CANTEX (38)
- CONDUIT PRODUCTS (247)
- DOTTIE (226)
- EATON (2)
- EATON B-LINE SERIES (34)
- EATON CROUSE-HINDS SERIES (1,131)
- ELECTROLINE (9)
- EMERSON (289)
- ERICSON MANUFACTURING CO (1)
- HARGER LIGHTING & GROUNDING (4)
- HAYDON CORP (1)
- HELLERMANN TYTON (60)
- HEYCO PRODUCTS (27)
- HUBBELL (23)
- LEGRAND - WIREMOLD (4)
- LEVITON (1)
- MARATHON (14)
- MINERALLAC (1)
- MOLEX (8)
- NVENT CADDY (39)
- O-Z/GEDNEY (1,143)
- RED DOT (17)
- RITTAL CORP (4)
- SIEMENS (5)
- SOUTHWIRE (27)
- TY-FLOT (62)
Installation
- (1)-Screw, Squeeze (1)
- (2) Screw (2)
- (2)-Screw, Squeeze (1)
- (4) Screw (4)
- 1 Hole (15)
- 1 Hole Screw-on (5)
- 1 Hole Snap-on (1)
- 1-Hole (241)
- 1-Hole Snap-On (65)
- 1-Piece (1)
- 2 Hole (3)
- 2 Holes (8)
- 2-Hole (106)
- 2-Hole Snap-On (50)
- 2-Piece (13)
- 3-Piece, Screw Secured (10)
- 90 Degree Compression (1)
- 90-Degree Insert (6)
- 90° Insert (2)
- Angled-Saddle, 1-Screw (37)
- Bell End (25)
- Bolt/Anchor (1)
- Clamp (32)
- Clamp x MNPT (2)
- Clamp, (2)-Screw (3)
- Clamp, (4)-Screw (1)
- Clamp, 1-Screw (12)
- Clamp, 2-Screw (79)
- Clamp, 2-Screw, Squeeze (1)
- Clamp, 4-Screw (12)
- Clamp, Hinged (53)
- Clamp, NPSM (1)
- Clamp, Screw (3)
- Clamp, Squeeze (91)
- Clamps, (2)1-Screw (1)
- Compression (480)
- Compression 2-Piece (5)
- Compression EMT (2)
- Compression EMT, Clamp-On Flex (10)
- Compression EMT, Compression Liquidtight (5)
- Compression EMT, Screw-In Flex (6)
- Compression Female (2)
- Compression Female, Threaded Male (15)
- Compression Rigid, Compression Liquidtight (3)
- Compression, NPSM (1)
- EMT Conduit (2)
- Easy Push-in (1)
- External Thread (14)
- Female Threaded (5)
- Flat (193)
- Flexible Metallic Liquid-tight Conduit (2)
- Gland Compression (1)
- Hex Head with Integral Sealing Ring (2)
- Inside Bushing (24)
- Insulated NPT Thread (1)
- KO (1)
- Knockout (3)
- Lock Nut (1)
- Male NPS Thread (1)
- Male Threaded (9)
- Male Threaded x Female Threaded (1)
- Male Threaded x Tapered Female Threaded (5)
- NPS (1)
- NPS Threaded (1)
- NPSM (7)
- NPSM, Set Screw (8)
- NPSM, Squeeze (11)
- NPT (27)
- NPT Thread (1)
- NPT, Flush Head (2)
- Nail Strap (21)
- Nail-in (4)
- One Hole (3)
- Pre-assembled (1)
- Press In (14)
- Push Fit (1)
- Push-In (12)
- Push-to-Install (21)
- Recessed (1)
- Rigid/IMC Conduit (2)
- Saddle (1)
- Saddle, 1-Screw (17)
- Saddle, Screw (2)
- Screw (7)
- Screw Clamp (1)
- Screw Clamp x MNPT (1)
- Screw-In (67)
- Screw-In, with Sliding Cover (1)
- Set Screw (22)
- Set Screw EMT to Set Screw Rigid (1)
- Set Screw EMT, Screw Clamp on Flex End (4)
- Set Screw x Saddle Clamp (1)
- Set Screw, MNPT (1)
- Set-Screw (265)
- Set-Screw EMT (3)
- Set-Screw EMT, Clamp-On Flex (8)
- Set-Screw EMT, Set-Screw Flex (9)
- Set-Screw Female, Threaded Male (2)
- Set-Screw Female/Female (12)
- Set-Screw Female/Female, Side-Entry (2)
- Set-Screw Rigid, Set-Screw EMT (8)
- Set-Screw, 1-Screw (8)
- Set-Screw, Angled (1)
- Set-Screw, Snap-In (2)
- Snap Down (1)
- Snap-In (57)
- Snap-In KO, Saddle 1-Screw (8)
- Snap-In KO, Saddle 2-Screw (3)
- Snap-In KO, Screw-In Conduit (3)
- Snap-In-Cable (2)
- Snap-In-KO (4)
- Snap-In-KO, 1-Screw (5)
- Snap-In-KO, Clamp 1-Screw (2)
- Snap-In-KO, Clamp 2-Screw (8)
- Snap-In-KO, Snap-In-Cable (16)
- Solvent Weld (1)
- Spring Clip (1)
- Spring Clip, Screw-In (1)
- Squeeze (16)
- Squeeze x MNPT (1)
- Squeeze, NPSM (1)
- Straight (7)
- Straight Insert (6)
- Threaded (315)
- Threaded 1-Piece (9)
- Threaded 2-Piece with Gasket (34)
- Threaded 2-Piece with Sealing Ring (26)
- Threaded 3 Piece (1)
- Threaded 3-Piece (88)
- Threaded Bolt On (6)
- Threaded Female/Female (39)
- Threaded Female/Female, Side Entry (4)
- Threaded Hex Head Shoulder (5)
- Threaded Hex-Head Flush Mount (15)
- Threaded Hex-Head Shoulder (32)
- Threaded Male-Female (2)
- Threaded Male/Female (49)
- Threaded Male/Male (2)
- Threaded Rigid (1)
- Threaded Rigid and IMC Conduit (2)
- Threaded Rigid, Clamp-On Flex (6)
- Threaded Rigid, Compression EMT (16)
- Threaded Rigid, Compression Liquidtight (33)
- Threaded Shoulder (5)
- Threaded Split (12)
- Threaded w/Bonding Screws and Locknut (1)
- Threaded w/O-Ring (1)
- Threaded w/Sealing Ring (10)
- Threaded with Bonding Screw and Locknut, O-Ring (2)
- Threaded with O-Ring and Locknut (2)
- Threaded with Sealing Ring and Lock Nut (63)
- Threaded with Sealing Ring and Nut (213)
- Threaded, 3-Piece (1)
- Threaded, Bar Head (1)
- Threaded, Male (1)
- Threaded, Male to Female (1)
- Threaded, Recessed Hex Head (1)
- Threaded, Recessed Socket Head (7)
- Threaded, Set Screw (1)
- Threaded, Square Head (2)
- Threaded/Set-Screw Female/Female (3)
- Threaded/Set-Screw Male/Female (1)
- Threadless (17)
- Threadless Compression (1)
- Threadless Set Screw (5)
- Threadless Set-Screw (1)
- Tri-head Set Screw (3)
- Unthreaded with Buna-N O-Ring and Nut (4)
OD Max
- 1-7/8 in. (1)
- 1.75 in. (1)
- 3-1/16 in. (1)
- 5-3/8 in. (1)
- 5.88 in. (1)
- 6-7/16 in. (1)
- 8-3/8 in. (1)
Height
- 1-1/4 in. (3)
- 1-3/8 in. (1)
- 1-5/16 in. (1)
- 1-5/8 in. (4)
- 1-9/16 in. (1)
- 2 in. (1)
- 3-1/8 in. (7)
- 3-11/16 in. (3)
- 3-3/4 in. (2)
- 3-45/64 in. (1)
- 3-5/8 in. (1)
- 3.72 in. (1)
- 3.84 in. (1)
Diameter
- 1-3/4 in. (1)
- 1.75 in. (4)
- 2 in. (3)
- 2-1/4 in. (4)
- 2-5/8 in. (2)
- 2-7/16 in. (1)
- 2.12 in. (3)
- 2.25 in. (5)
- 2.43 in. (8)
- 2.5 in. (4)
- 2.62 in. (1)
- 2.63 in. (1)
- 2.67 in. (7)
- 2.75 in. (5)
- 2.99 in. (2)
- 3 in. (1)
- 3-1/2 in. (2)
- 3-1/8in. (1)
- 3.12 in. (5)
- 3.13 in. (1)
- 3.16 in. (1)
- 3.19 in. (1)
- 3.36 in. (11)
- 3.38 in. (3)
- 3.46 in. (2)
- 3.5 in. (3)
- 3.62 in. (2)
- 3.68 in. (6)
- 3.86 in. (7)
- 3.87 in. (1)
- 4 in. (7)
- 4-1/2 in. (1)
- 4-3/4 in. (1)
- 4.18 in. (2)
- 4.31 in. (1)
- 4.37 in. (1)
- 4.38 in. (1)
- 4.5 in. (1)
- 4.52 in. (2)
- 4.75 in. (6)
- 4.87 in. (4)
- 4.96 in. (9)
- 5 in. (2)
- 5-3/8 in. (2)
- 5.13 in. (1)
- 5.25 in. (2)
- 5.37 in. (6)
- 5.38 in. (2)
- 5.5 in. (1)
- 5.72 in. (1)
- 5.75 in. (1)
- 6 in. (4)
- 6-5/8 in. (1)
- 6.25 in. (1)
- 6.37 in. (7)
- 6.62 in. (6)
- 6.63 in. (1)
- 6.75 in. (2)
- 6.87 in. (1)
- 7 in. (1)
- 7-1/4 in. (2)
- 7-3/4 in. (1)
- 7-5/8 in. (1)
- 7-7/8 in. (1)
- 7.64 in. (1)
- 7.99 in. (2)
- 8 in. (1)
- 8-1/4 in. (1)
- 8-3/8 in. (1)
- 9-1/2 in. (1)
- 9.56 in. (1)
Trade Size
- 0.5 in. (3)
- 0.68 in. (1)
- 0.75 in. (2)
- 1 (4)
- 1 1/2 in. (2)
- 1 NPT-34mm (1)
- 1 in. (593)
- 1 in. EMT to 1 in. Flex (6)
- 1 in. Flex to 1 in. EMT (1)
- 1 in. Male, 3/4 in. Female (1)
- 1 in. NPT (2)
- 1 in. Rigid to 1 in. EMT (5)
- 1 in. Rigid to 1 in. Flex (7)
- 1 in. and 1-1/4 in. (2)
- 1 to 3/4 in. (1)
- 1 x 2-1/2 in. (1)
- 1-1/2 in. (476)
- 1-1/2 in. EMT to 1-1/2 in. Flex (1)
- 1-1/2 in. NPT (1)
- 1-1/2 in. Rigid to 1-1/2 in. EMT (1)
- 1-1/2 in. Rigid to 1-1/2 in. Flex (5)
- 1-1/2 in. and 2 in. (1)
- 1-1/2 to 1-1/4 in. (1)
- 1-1/2 to 3/4 in. (2)
- 1-1/2 x 1-1/4 in. (1)
- 1-1/2 x 3/4 in. (2)
- 1-1/4 in. (452)
- 1-1/4 in. EMT to 1-1/4 in. Flex (2)
- 1-1/4 in. Rigid to 1-1/4 in. EMT (2)
- 1-1/4 in. Rigid to 1-1/4 in. Flex (3)
- 1-1/4 to 2 in. (2)
- 1-1/4 x 2-3/4 in. (1)
- 1-1/8 in. (2)
- 1.25 in. (4)
- 1.5 in. (6)
- 1/-1/4 in. (1)
- 1/2 (4)
- 1/2 in. (646)
- 1/2 in. (1/2 KO) (1)
- 1/2 in. EMT to 1/2 in. Flex (14)
- 1/2 in. EMT to 3/8 in. Flex (9)
- 1/2 in. MNPT x 3/4 in. FNPT (1)
- 1/2 in. NPT (4)
- 1/2 in. Rigid to 1/2 in. EMT (7)
- 1/2 in. Rigid to 1/2 in. Flex (7)
- 1/2 in. Rigid to 3/8 in. Flex (2)
- 1/2 in. and 3/4 in. (2)
- 1/2 x 3/4 in. (1)
- 1/2-1 in. (2)
- 1/4 in. (20)
- 1/4 to 1/2 in. (1)
- 1/8 in. (3)
- 10 in. (3)
- 12 in. (1)
- 13mm (2)
- 15/16 in. (1)
- 16mm (2)
- 2 1/2 in. (1)
- 2 in. (498)
- 2 in. EMT to 2 in. Flex (1)
- 2 in. Rigid to 2 in. EMT (1)
- 2 in. Rigid to 2 in. Flex (4)
- 2 to 2-1/2 in. (1)
- 2 x 1 in. (1)
- 2-1/2 in. (307)
- 2-1/2 in. Rigid to 2-1/2 in. Flex (1)
- 2-1/2 in., 3 in. (1)
- 2-1/4 in. (1)
- 2-1/8 in. (1)
- 2.5 in. (7)
- 20mm (4)
- 21mm (1)
- 25mm (3)
- 3 in. (332)
- 3 in. (78mm) (1)
- 3 in. Rigid to 3 in. Flex (1)
- 3 to 2 in. (1)
- 3 x 1.5 in. (1)
- 3-1/2 - 2-1/2 in. (1)
- 3-1/2 in. (209)
- 3-1/2 in. Rigid to 3-1/2 in. Flex (1)
- 3-1/2 in., 4 in. (1)
- 3-1/2 to 4 in. (1)
- 3.5 in. (3)
- 3/1/02 (1)
- 3/4 (4)
- 3/4 in. (682)
- 3/4 in. (21) (1)
- 3/4 in. EMT to 3/4 in. Flex (14)
- 3/4 in. MNPT X 1 in. FNPT (1)
- 3/4 in. MNPT X 1/2 in. FNPT (1)
- 3/4 in. NPT (1)
- 3/4 in. Rigid to 3/4 in. EMT (8)
- 3/4 in. Rigid to 3/4 in. Flex (8)
- 3/4 to 1/2 in. (1)
- 3/4 x 1 in. (2)
- 3/8 in. (69)
- 3/8 in. (1/2KO) (98)
- 3/8 in. (1/4KO) (1)
- 3/8 in. Rigid to 3/8 in. Flex (1)
- 3/8 in., 1/2 in., 3/4 in. (1)
- 3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in. (1)
- 32mm (2)
- 34mm (1)
- 35mm (1)
- 4 - 2-1/2 in. (1)
- 4 in. (320)
- 4 in. Rigid to 4 in. Flex (1)
- 4 x 1-1/2 in. (1)
- 4-1/2 in. (1)
- 40 mm (1)
- 40mm (1)
- 48mm (1)
- 5 in. (91)
- 5 x 1-1/2 in. (2)
- 5/16 in. (3/8 KO) (1)
- 5/8 in. (2)
- 50mm (2)
- 56mm (1)
- 6 in. (65)
- 7/16 in. (2)
- 7/8 in. (1)
- 75mm (2)
- 8 in. (3)
- L x W: 1.7 x 0.8 in. (1)
- M12 x 1.5 (1)
- M12 x 1.5 in. (1)
- M16 (1)
- M20 (3)
- M20 x 0.5 in. (3)
- M20 x 0.75 in. (3)
- M20 x 1.5 in. (2)
- M20-1/2 in. NPT (1)
- M25 (5)
- M25 x 0.75 in. (3)
- M25 x 1.5 (2)
- M25 x 1.5 in. (2)
- M25 x 3/4 in. (1)
- M32 (1)
- M32 x 0.75 in. (1)
- M32 x 1 in. (2)
- M32 x 1-1/4 in. (1)
- M32 x 1.5 (2)
- M32 x 1.5 in. (1)
- M40 (2)
- M40 x 0.75 in. (1)
- M40 x 1 in. (1)
- M40 x 1-1/2 in. (1)
- M40 x 1-1/4 in. (1)
- M40 x 1.25 in. (1)
- M40 x 1.5 in. (4)
- M50 (1)
- M50 x 1.5 in. (3)
- M50 x 2 in. (1)
- M6 (1)
- M63 x 1.5 in. (1)
- M63 x 2 in. (1)
- M63 x 2.5 in. (1)
- M75 (1)
- NPT 1/2 in. (1)
- NPT 3/4 in. (1)
- NW12 (1)
- NW17 (1)
- NW17 x NW12 x NW12 (1)
- NW23 (1)
- NW23 x NW17 x NW17 (1)
- NW36 (1)
- NW48, NW50 (1)
- PG 11 (2)
- PG 13 (1)
- PG 13.5 (1)
- PG 16 (2)
- PG 21 (1)
- PG 29 (1)
- PG 7 (2)
- PG 9 (2)
- PG-9 (1)
- Trade 2 in. (1)
Angle
- 15° (4)
- 22-1/2 Degree (2)
- 30 Degree (2)
- 30° (1)
- 45 Degree (19)
- 45 deg. (4)
- 90 Degree (175)
- 90 Degrees (1)
- 90 deg. (10)
Size Application
Size
- 0.5 in. (1)
- 0.75 in. (2)
- 1 in. (5)
- 1-1/2 in. (1)
- 1-1/4 in. (1)
- 1-1/4 x 3/4 in. (1)
- 1.25 in. (1)
- 1.5 in. (2)
- 1/2 in. (8)
- 2 in. (1)
- 2 to 2-1/2 in. (1)
- 2 to 3 in. (1)
- 2 x 1/2 in. (1)
- 2.5 in. (1)
- 3 in. (4)
- 3.5 in. (1)
- 3/4 in. (6)
- 3/8 in. (5)
- 4 in. (2)
- 5 in. (1)
- 5/16 in. (6)
- 7/16 in. (4)
- Dia.: 1.77 in. (1)
- Dia.xH: 1.13 x 0.5 in. (1)
- Dia.xH: 2.15 x 0.62 in. (1)
- Dia.xH: 5.96 x 1.28 in. (1)
- Dia.xH: 7.43 x 1.18 in. (1)
- Dia: 1-3/4 in. (1)
- Dia: 2.63 in. (1)
- DiaxH: 1-1/4 x 7-1/4 in. (1)
- DiaxH: 1-15/16 x 21/32 in. (1)
- DiaxH: 1-9/32 x 13/32 in. (1)
- DiaxH: 1.56 x 0.5 in. (1)
- DiaxH: 1.63 x 0.75 in. (1)
- DiaxH: 2-1/4 x 3/4 in. (2)
- DiaxH: 2-11/16 x 7/8 in. (1)
- DiaxH: 2-3/16 x 23/32 in. (1)
- DiaxH: 2.16 x 0.63 in. (1)
- DiaxH: 2.63 x 0.63 in. (1)
- DiaxH: 3-3/16 x 31/32 in. (1)
- DiaxH: 3.19 x 0.72 in. (1)
- DiaxH: 3.81 x 0.94 in. (1)
- DiaxH: 4 x 1 in. (2)
- DiaxH: 4.34 x 0.75 in. (1)
- DiaxH: 4.5 x 1.19 in. (1)
- DiaxH: 4.94 x 1.06 in. (1)
- DiaxH: 5.13 x 1.63 in. (1)
- DiaxH: 6-1/4 x 1/2 in. (1)
- DiaxH: 6.06 x 1.31 in. (1)
- DiaxH: 7.38 x 0.5 in. (1)
- DiaxH: 7.38 x 1.38 in. (1)
- DiaxT: 4.35 x 0.85 in. (1)
- Head DiaxH: 1.44 x 0.41 in. (1)
- HxDia.: 0.62 x 2.12 in. (1)
- HxDia.: 0.75 x 1.87 in. (1)
- HxDia.: 1.25 x 6.06 in. (1)
- LxW: 3-3/8 x 2 in. (1)
- LxWxH: 0.95 x 0.84 x 0.69 in. (1)
- LxWxH: 1-3/4 x 1 x 1-3/4 in. (1)
- LxWxH: 1.5 x 2.05 x 1.5 in. (1)
- LxWxH: 4.23 x 2.39 x 1.21 in. (1)
- LxWxH: 4.37 x 2.9 x 2.03 in. (1)
- LxWxH: 5.06 x 5.06 x 1.13 in. (1)
- LxWxH: 5.16 x 2.03 x 2.03 in. (1)
- LxWxH: 8.1 x 6.53 x 2.16 in. (1)
- WxH: 1-1/16 x 1-9/32 in. (1)
- WxT: 2.18 x 0.6 in. (1)
- WxT: 4.37 x 0.93 in. (1)
Schedule/Series
- Schedule 40 (25)
Length
- 1-1/2 in. (1)
- 10 in. (21)
- 10-1/4 in. (1)
- 10-3/8 in. (1)
- 10-5/8 in. (2)
- 10.13 in. (1)
- 10.38 in. (1)
- 10.56 in. (7)
- 10.63 in. (2)
- 10.75 in. (4)
- 11 in. (2)
- 11-1/2 in. (1)
- 11-1/8 in. (1)
- 11.13 in. (1)
- 11.25 in. (5)
- 11.38 in. (1)
- 11.56 in. (2)
- 11.75 in. (1)
- 11.87 in. (1)
- 12 in. (13)
- 12-1/8 in. (1)
- 12.12 in. (5)
- 12.13 in. (1)
- 12.25 in. (4)
- 12.87 in. (4)
- 13.31 in. (1)
- 13.81 in. (2)
- 14 in. (6)
- 14-1/4 in. (2)
- 14.56 in. (4)
- 15.13 in. (2)
- 15.25 in. (4)
- 15.38 in. (1)
- 15.5 in. (2)
- 15.63 in. (1)
- 15.88 in. (1)
- 16.12 in. (4)
- 16.87 in. (3)
- 17.25 in. (1)
- 17.39 in. (1)
- 17.42 in. (1)
- 18.27 in. (1)
- 18.63 in. (1)
- 18.69 in. (1)
- 18.87 in. (2)
- 19.04 in. (1)
- 19.5 in. (1)
- 2 in. (5)
- 2-1/2 in. (6)
- 2-7/8 in. (1)
- 20 in. (1)
- 20.47 in. (1)
- 21.39 in. (1)
- 21.42 in. (1)
- 22.27 in. (1)
- 22.69 in. (1)
- 23.04 in. (1)
- 23.23 in. (1)
- 23.75 in. (1)
- 24 in. (1)
- 24.09 in. (1)
- 27.23 in. (1)
- 28.09 in. (1)
- 28.7 in. (2)
- 29.3 in. (2)
- 3 ft. (9)
- 3 in. (7)
- 3-1/2 in. (8)
- 3-15/16 in. (1)
- 36 in. (1)
- 4 in. (10)
- 4-1/2 in. (2)
- 4-15/16 in. (1)
- 4-3/4 in. (1)
- 4.5 in. (1)
- 5 in. (9)
- 5-1/2 in. (1)
- 5-15/16 in. (1)
- 5.5 in. (1)
- 6 in. (11)
- 6-1/4 in. (1)
- 6-15/16 in. (1)
- 6-3/8 in. (1)
- 6-5/8 in. (4)
- 6.38 in. (1)
- 6.75 in. (6)
- 60 in. (1)
- 7 in. (4)
- 7-1/2 in. (1)
- 7-1/8 in. (1)
- 7.13 in. (1)
- 7.25 in. (4)
- 7.5 in. (1)
- 7.87 in. (5)
- 8 in. (14)
- 8-1/2 in. (1)
- 8-1/4 in. (1)
- 8-1/8 in. (1)
- 8-5/8 in. (1)
- 8.12 in. (1)
- 8.25 in. (4)
- 8.5 in. (2)
- 9 in. (1)
- 9-1/2 in. (1)
- 9.12 in. (1)
- 9.25 in. (2)
- 9.31 in. (1)
- 9.38 in. (1)
- 9.81 in. (3)
- 9.88 in. (1)
- Close, 1-1/2 in. (1)
- Close, 1-3/4 in. (1)
- Close, 1-3/8 in. (1)
- Close, 1-5/8 in. (1)
- Close, 2 in. (1)
- Close, 2-1/2 in. (1)
- Close, 2-3/4 in. (1)
- Close, 2-5/8 in. (1)
- Close, 3 in. (1)
Connection
- Compression (1)
- FNPT x MNPT (1)
- Female (3)
- Female-Female (1)
- UNY Male Threads (1)
Overall Length
Grounding
- Externally Grounded (30)
- Externally Grounded (BJ Jumpers order separately) (11)
- Externally Grounded (Bonding Jumpers Order Separately) (1)
- Externally Grounded (Bonding Jumpers included) (1)
- Externally Grounded (XJB Jumpers order separately) (9)
- Externally Grounded Tinned Copper Braid (21)
- Internally Grounded (28)
- Internally Grounded (Bonding Jumpers Included) (3)
- Internally Grounded (Bonding Jumpers included) (65)
- Internally Grounded Tinned Copper Braid (2)
- Tinned Copper Braid (3)
Material
- 10 Gauge Steel (1)
- 11 Gauge Steel (4)
- 12 Gauge Steel (2)
- 13 ga Steel (1)
- 14 Gauge (3)
- 15 ga Steel (2)
- 16 Gauge Steel (5)
- 18 Gauge Steel (1)
- 19 ga Steel (1)
- 304 Stainless Steel (18)
- 316 Stainless Steel (70)
- Acetal (1)
- Acrylonitrile Butadiene Styrene (1)
- Aluminum (319)
- Aluminum Die-cast (2)
- Aluminum, Cast (9)
- Aluminum, Galvanized (1)
- Aluminum, PVC 40mil Coated (5)
- Aluminum, PVC Coated (3)
- Aluminum, Polypropylene Insulator (4)
- Aluminum/Feraloy Iron Alloy (2)
- Body: Zinc-plated Cast Iron, Lug: Tin-plated Aluminum (1)
- Brass (11)
- Bright 316 Stainless Steel (1)
- Brite Polished 316 Stainless Steel (1)
- Bronze (5)
- Bronze, Neoprene (4)
- Bronze, Neoprene, SS (6)
- Canvas Base Phenolic (2)
- Carbon Steel (6)
- Cast Aluminum (2)
- Cast Iron (14)
- Copper Alloy (2)
- Copper-free Aluminium (1)
- Copper-free Aluminum (43)
- Copper-free Aluminum, Electrogalvanized (1)
- Corrosion-Resistant Zinc (1)
- Die-Cast Zinc (15)
- Die-cast (90)
- Die-cast Aluminum (3)
- Die-cast Zinc (767)
- Die-cast Zinc, PVC Coated (2)
- Ductile Cast Iron (2)
- Ductile Iron (11)
- Ductile Iron, Hot Dip Galvanized (3)
- Ductile Iron/Malleable Iron (1)
- EPDM Rubber (1)
- ETPB (4)
- Elastomer (1)
- Electro Plated Die Cast Zinc (1)
- Electro Zinc Malleable Iron, Polyethylene Cap (1)
- Electro Zinc Plating Malleable Iron with PVC Coating (3)
- Electro Zinc-plated Malleable Iron (3)
- Electro Zinc-plated Steel (11)
- Electro-Zinc Malleable Iron (9)
- Electro-plated Zinc Malleable Iron (1)
- Electro-plated Zinc Steel (9)
- Electrogalvanized Steel (21)
- Electrogalvanizing Cast Iron (1)
- Epoxy Zinc Coated Malleable/Ductile Iron (2)
- Feraloy Iron Alloy (12)
- Feraloy Iron Alloy, Ductile Iron (1)
- Feraloy Iron Alloy, Electrogalvanized (1)
- Feraloy® Iron Alloy, Electrogalvanized (1)
- Galvanic/Electrolytic Zinc-plated Ductile Cast Iron (3)
- Galvanized (3)
- Galvanized Steel (41)
- Glass Filled Nylon (3)
- Grade A2 Stainless Steel (1)
- Gray Galvanized Steel (1)
- Gray Urethane Coated Steel (5)
- HDPE (6)
- High Impact Styrene (1)
- Hot Dip Galvanized Iron (4)
- Hot Dip Galvanized Malleable Iron (1)
- Hot Dip Galvanized Malleable, Ductile Iron (1)
- Hot Dip Galvanized Malleable, Ductile Iron or Steel (6)
- Hot Dip Galvanized Steel (13)
- Hot Dipped Galvanized Feraloy® Iron Alloy/Molded Neoprene/Stainless Steel/Molded Plastic (7)
- Hot-Dipped Galvanized Steel (1)
- Iron (23)
- Iron Alloy (1)
- Iron, Ductile (50)
- Iron, Malleable (15)
- Iron, PVC 40 mil Coated (1)
- Iron, Zinc-plated (1)
- Krydon with Steel Interior (6)
- LDPE (1)
- Light Gauge Steel (1)
- Low Density Polyethylene (21)
- Malleable Iron (1,067)
- Malleable Iron or Zinc-plated (1)
- Malleable Iron, Hot Dip Galvanized (52)
- Malleable Iron, PVC Coated (4)
- Malleable Iron, Zinc Electro-plated (5)
- Malleable Iron, Zinc-plated (3)
- Malleable Iron/Steel (2)
- Malleable or Ductile Iron, Hot Dip Galvanized (1)
- Material (2)
- Mechanically Galvanized Malleable Iron (1)
- Metallic (2)
- Natural Aluminum (4)
- Natural Die-cast Zinc (5)
- Natural Zinc (1)
- Neoprene (13)
- Neoprene Rubber (3)
- Nickel Plated Brass (1)
- Nickel-plated Brass (5)
- Non-Metal (1)
- Nonmetallic (14)
- Nylon (58)
- Nylon 6/6 (7)
- Nylon 66 (4)
- Nylon, Black (2)
- Nylon, Gray (2)
- Nylon/Polyamide 6.6 (8)
- PVC (38)
- PVC Coated (2)
- PVC Coated Aluminum (4)
- PVC Coated Iron (1)
- PVC Coated Malleable Iron (8)
- PVC Coated Steel (15)
- PVC Coated Zinc (8)
- PVC Gasketed Steel (1)
- PVC-Coated Iron, Gray (2)
- Painted Steel (2)
- Phenolic (11)
- Plain Steel (3)
- Plastic (151)
- Plastic Coated Cold Rolled High Carbon Steel (1)
- Plastic Coated High Carbon Steel (1)
- Plastic Coated Iron (5)
- Plastic Saddle, Carbon Steel Nail (2)
- Plated Steel (2)
- Polished Bright 304 Stainless Steel (2)
- Polyamide (8)
- Polyamide 6 (3)
- Polyamide 6.6 (8)
- Polyamide Nylon 6/6 (1)
- Polyamide/Nylon 6 (10)
- Polyethylene (19)
- Polypropylene (18)
- Polystyrene (4)
- Pre-Galvanized Steel (7)
- Rubber (2)
- Santoprene™ TPE/Steel (2)
- Schedule 40 PVC (14)
- Spring Steel (1)
- Stainless Steel (115)
- Stainless Steel Retainer (7)
- Stainless Steel, Type 316 (13)
- Stainless Steel/Bronze (8)
- Stamped Steel (3)
- Stamped Steel, Gray PVC-Coated (1)
- Steel (1,341)
- Steel, Electrogalvanized (17)
- Steel, Galvanized (159)
- Steel, PVC 40mil Coated (33)
- Steel, PVC Coated (4)
- Steel, Stamped (2)
- Steel, Urethane-Coated (4)
- Steel, Zinc-plated (126)
- Steel/Malleable Iron, Electro-Zinc Plating (1)
- Thermoplastic (79)
- Thermoplastic, 105C (6)
- Thermoset Phenolic (4)
- Thin-Steel (4)
- Turned Steel (1)
- UV-Resistant PVC (11)
- Untreated Die Cast Zinc Alloy (1)
- Urethane Coated Iron (2)
- Urethane Coated Steel (1)
- Vinyl (7)
- Zinc (87)
- Zinc Alloy (13)
- Zinc Body, Neoprene Gasket, Aluminum Cover (2)
- Zinc Die Cast Steel (1)
- Zinc Die-cast (5)
- Zinc Electro-plated Malleable Iron (18)
- Zinc Electro-plated Steel (23)
- Zinc Electroplate Steel (1)
- Zinc Electroplated Copper-free Aluminum (1)
- Zinc Electroplated Ductile Iron (1)
- Zinc Galvanized Machined Steel (1)
- Zinc Plated Malleable Iron with Neoprene Gasket (1)
- Zinc Pre-Galvanized Steel (3)
- Zinc with Thermoplastic (1)
- Zinc, Chrome-plated (7)
- Zinc, Die-cast (21)
- Zinc, Nickel-chrome plate finish (8)
- Zinc, PVC Coated (1)
- Zinc-electro-plated Steel (7)
- Zinc-plated Malleable Iron (25)
- Zinc-plated Spring Steel (1)
- Zinc-plated Steel (41)
- Zinc-plated Steel Retainer (1)
- Zinc-plated-Chromate Dipped Malleable Iron (1)
Ground
- Grounding (99)
- Grounding Screw (49)
- Lug (10)
- Non-Grounding (177)
- None (2)
Throat
- 0.944 in. (1)
- 18 in. Radius (1)
- 24 in. Radius (5)
- 36 in. Radius (10)
- 48 in. Radius (9)
- Bushed (19)
- Insulated (505)
- Insulated, Gasketed (12)
- Non-Insulated (84)
- Non-insulated (7)
- Non-metallic (1)
- Nonmetallic (10)
- Nylon (18)
- Nylon Insulated (4)
- Phenolic Insulated (1)
- Plastic (123)
- Plastic Insert Cap (19)
- Plastic Throat Liner (1)
- Polypropylene (8)
- Thermoplastic (30)
- Thermoplastic Insulated (7)
- Threaded (1)
- Throat (1)
