Rotary Position Sensor, Screw, 5 VDC, IP69K

Description

RTP series with external actuator, 60° (+/-30°) operating range, 5 VDC supply voltage, European pinout style, standard: 0.5 VDC (left), 4.5 VDC (right) ratiometric output voltage, housed magnet (carrier type A). The RTP series hall effect rotary position sensors provide non-contact sensing in harsh transportation and industrial applications at a competitive cost. These products take non-contact sensing to the next level by separating the magnet from the sensor body. The absence of the actuator shaft removes the wear and tear on the bearings caused by radial forces. A choice of a bare or a housed magnet is available. These products use a magnetically biased, hall effect integrated circuit (IC) to sense rotary movement of the actuator over a set operating range. Rotation of the actuator changes the magnet's position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, is sealed in an IP69K-qualified rugged package for durability in most harsh environments. Nine operating ranges from 50 to 360° are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 to 30 VDC. Honeywell's industry leading capabilities in research and development provide the customer with known quality and support.